1.
Lower the bucket to the ground.
2.
Move the pilot control shut-off lever to the
"LOCKED" position.
3.
Turn the starter switch "OFF" to stop the
engine.
4.
Remove grommet (1).
5.
Fuse box cover (2) can be locked. If it is
locked, unlock to remove it.
6.
If a fuse looks like the figure below (right),
it is blown. Replace it with a spare fuse
stored in the fuse box.
7.
After fuse replacement, be sure to push the
lock of the fuse box cover until it clicks.
２
2.6
HANDLING OF FUSE BOX
2.6.1
ABOUT FUSE & RELAY BOX
The fuses protect the wiring and electrical components from burn out due to excess current. If the
electrical system does not work properly, check to replace any blown fuses with new ones.
If there is a corroded fuse generating white powder on it, or if some looseness exists between a fuse
and its fuse holder, replace it as well.
2.6.2
REPLACING FUSES
The spare fuses are stored in the fuse & relay box.
A fuse must be replaced with a one of the same type and of the blown fuses. If the capacity is
different, it may cause damage to the electrical system. If fuse replacement is frequently required, it
may be due to a failure in the electrical system. Please contact KOBELCO authorized dealer/distributor.
Make sure the starter switch is in the "OFF" position when replacing fuses.
The main fuse box is positioned inside the seat stand cover.
［
2. MACHINE FAMILIARIZATION
］
2-19
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2PX00051ZE03] [0731CsCshWbYs]
