Knauer Azura RID 2.1L, Instructions Manual

Page: 38 / 55

AZURA® Detector RID 2.1L / RID 2.1L HighFlow Instructions V6750
34 Product information
Procedure Figure
1. Turn the main switch
1
to
OFF.
Either restart the detector soon or, you prepare it for storage (see 10.3 on
page 39).
Note: Standard processes regarding IQ ans OQ in single devices may be
handled differently in individual cases.
The customer may request the Installation Qualification, which is free of
charge. In case of a request, the Technical Support of KNAUER or from a
provider authorized by KNAUER performs this functionality test during
the installation.
The Installation Qualification is a standardized document that includes
the following:
ƒ
confirmation of flawless condition at delivery
ƒ
check if the delivery is complete
ƒ
certification on the functionality of the device
The Operation Qualification includes an extensive functionality test
according to KNAUER standard OQ documents. The Operation Qualifi-
cation is a standardized document and free of charge. It is not part of the
delivery. Please contact the Technical Support in case of request.
The Operation Qualification includes the following:
ƒ
definition of customer requirements and acceptance terms
ƒ
documentation on device specifications
ƒ
device functionality check at installation site
To make sure that the device operates within the specified range, you
should test the device regularly. The test intervals depend on the usage
of the device.
The test can be carried out either by the Technical Support of KNAUER or
from a provider authorized by KNAUER (for a fee).
Note: Flush the system (with the flush valve open) with water for 60 min-
utes before starting the device test.
1
Next Steps
8. Functionality tests
Installation Qualification
(IQ)
Operation Qualification
(OQ)
Test Intervals
Execution