AZURA® Detector RID 2.1L / RID 2.1L HighFlow Instructions V6750
26
Product information
The detector can be operated in two ways:
Control with chromatography software
Operating with Mobile Control
Note:
It is not possible to use two control methods simultaneously. If the
detector is connected to the software, it cannot be controlled via Mobile
Control. The device status can be operated in two ways.
To control the device with chromatography software, you have to estab-
lish a connection between the LAN port and a computer (see 6.4 on page
17). You find a detailed description on chromatography software in a
corresponding instruction.
The Mobile Control runs on a tablet. You find a detailed description on
Mobile Control software in a corresponding instruction.
7.1
Meaning of the LEDs
There are three LEDs
1
and a standby switch
2
on the front of the
device. The figure shows the LED panel when the device is switched off.
The LEDs can have different colors depending on the operating
conditions.
Color
Operating condition
Operation
Left LED
flashes red
Error message
Check the system.
Shortly press the
switch to deactivate
the error message.
red
Serious error
Restart the device.
If the operating
condition does not
change, call the tech-
nical support.
green
Program or sequence
is running / has been
loaded.
Center LED
does not light
Not ready for
operation
Switch on the device.
7. Operation
Chromatography software
Mobile Control
1
2
