41
Calibration
4000 MiD® Instructions, V6695
Fig. 27
SFI with cover opened
Note:
It is not necessary to remove the three screws from the
top cover of the SFI.
7.
Once the cover is removed, use the PH1 Phillips screwdriver to remo-
ve the screw retaining the tee (Fig. 42).
Fig. 28
SFI splitting tee and retaining screw
8.
Remove the tee, reducing union and tubing from the SFI using the
plastic tweezers (A66911) (Fig. 43).
Fig. 29
SFI with splitting tee and reducing union removed
Securing screws
Waste line nut
SFI base
Splitting tee
Low flow tube
Reducing union
Top cover
Input line nut
Retaining screw
SFI base
Reducing union
Fingertight nuts
SFI base
Splitting tee
