22
Product information
4000 MiD® Instructions, V6695
Fig. 10
vac-chip assembly fully installed on the MiD
8.
To remove the vac-chip assembly from the MiD the user must first
ensure the system has been vented.
9.
Use the 4 mm “T” Allen key and loosen the four M4 screws in an
alternating criss-cross pattern until the screws are loose.
10.
Remove the four M4 screws.
11.
Gently pull the vac-chip assembly away from the SFD using the do-
wels as guides
.
12.
Once the vac-chip assembly is removed, the SFD cover plate must be
fitted.
Once the vac-chip assembly has been fitted the only remaining com-
ponent required to complete the MiD is the microspray source which is
contained within the spraychip assembly.
5.8 The spraychip assembly
The spraychip
®
assembly consists of the spraychip and a mounting inter-
face, there are three available components
The spraychip 200
Split Flow Interface (SFI)
Direct Flow Interface (DFI) – optional
Warning
High voltages are present in the spraychip assembly
when it is in operation. Incorrect installation of the assembly could
make it electrically unsafe. To prevent any risk of injury, please
carefully follow the instructions provided to install the spraychip
assembly.
Avertissement
Des tensions élevées sont présentes dans l’as-
semblage spraychip quand il est en opération. Une mauvaise ins-
tallation de l’assemblage pourrait le rendre électriquement dan-
gereux. Pour éviter tout risque de blessure, s’il vous plaît suivez
attentivement les instructions fournies pour installer l’assemblage
spraychip.
