KMT STREAMLINE SL-V SRP 100, Operation And Maintenance Manual

Page: 31 / 268

Section 2
Installation
20428689
10-2007/Rev 04
2-5
Thoroughly purge all supply plumbing prior to connection to remove any residue
that could contaminate the system.
Figure 2-3: Service Connections
Table 2-4
Service Connections
Connection Height
A Drain 1/2” NPT 7.50” (191 mm)
B Cutting Water In 1/2” NPT 10.50” (267 mm)
C Cooling Water Out 1/2” NPT 13.50” (343 mm)
D Cooling Water In 1/2” NPT 16.50” (419 mm)
E Plant Air In 1/4” NPT 32.00” (813 mm)
F Cutting Water Out 9/16” HP 36.00” (914 mm)
G Contaminated Waste Drain 1/2” NPT 41.00” (1,041 mm)
Cooling Water
Inlet cooling water flows through the oil-to-water heat exchanger in the hydraulic system to
control heat build-up in the hydraulic oil. The cooling water is then discharged through the
cooling water out port to either the drain or routed to a customer supplied water chiller.