KLS Martin IDP 101 S air plus, Mounting Instructions

Page: 6 / 106

Mounting Instructions
Suspension Arm Systems Independant
®
6 Revision 1
7.7.2 Installing the Cables for the Gas Supply and Exhaust Air ..................................... 71
7.7.3 Connecting the Earthing Cables ........................................................................ 73
7.7.4 Connecting the Power Cables ........................................................................... 73
7.7.5 Checking the Supply Cables ............................................................................. 74
7.8 Checks .............................................................................................. 74
7.8.1 Gas Type Check (M6 Service Head only) ........................................................... 74
7.8.2 Mechanical Collision Check .............................................................................. 74
7.9 Mounting the Canopy, Cover Caps and Claddings .................................... 75
7.9.1 Mounting the Single/Duo Canopy ..................................................................... 75
7.9.2 Mounting the Single Canopy ............................................................................ 77
7.9.3 Installing/Uninstalling the Cover Caps on the Extension Arm ................................ 79
7.9.4 Mounting the Plates on the Spring Arm ............................................................. 81
7.9.5 Mounting the Side Cladding on the Spring Arm .................................................. 82
7.9.6 Mounting the Lower Rear Cover Panels on the Spring Arm ................................... 83
7.9.7 Mounting the Front Side Claddings on the Spring Arm ......................................... 84
7.9.8 Mounting the Upper Front Cover Panel on the Spring Arm ................................... 85
8 Adjustment Work ....................................................................... 86
8.1 Safety Notice for Adjustment Work ........................................................ 86
8.2 Adjusting the Mechanical Brake for the M6 service head .......................... 86
8.3 Selecting the Load-Bearing Capacity on the Spring Arm ........................... 87
8.4 Adjusting the Vertical Lift on the Spring Arm .......................................... 91
8.5 Correcting the Vertical Alignment of the M6 Service Head ........................ 93
8.6 Swivel Stop on the Extension Arm and Spring Arm .................................. 94
8.6.1 Installing the Swivel Stop ................................................................................ 95
8.6.2 Removing the Swivel Stop ............................................................................... 97
9 Technical Specification ................................................................ 98
9.1 Dimensional Drawings ......................................................................... 98
9.1.1 Spring Arm, IDP 101 S air plus, Single Arm, with M6 Service Head ....................... 98
9.1.2 Spring Arm, IDP 101 S air plus, Dual Arm, with M6 Service Head ......................... 99
9.2 Technical Data .................................................................................. 100
9.2.1 Dead Weight ................................................................................................ 100
9.2.2 Maximum Load-Bearing Capacity .................................................................... 100
9.2.3 Brake Torque ............................................................................................... 100
9.2.4 General Technical Data ................................................................................. 101
9.3 Permissible Adaptions ........................................................................ 102
10 Inspection Plan ........................................................................ 103
11 Ecological Information .............................................................. 105
11.1 Packaging ........................................................................................ 105
11.2 Disposal of the Device ....................................................................... 105