Suspension Arm Systems Independant
34
Revision 1
Mounting the threaded bolts
•
Attach 1 hexagonal nut M16 on each of the 6/12 threaded bolts and use 1 spring
washer for each.
WARNING
Danger of injury due to the suspension arm system falling!
If the threaded bolts are not fully screwed in, they can tear out of the interface plate
and cause the suspension arm system to fall:
•
Fully screw in all shortened threaded bolts into the interface plate
up to the end
stop and on to the raw ceiling.
WARNING
Danger of injury due to the suspension arm system falling, and due not because of
insufficient torque!
Insufficiently tightened fastening elements can cause the suspension arm system to fall:
•
Tighten all hexagonal nuts with a torque of 195 Nm.
Check they are securely in place and that the distances between the shortened threaded
bolts :
•
The threaded bolts must be fully screwed into the interface plate
.
•
The 6/12 hexagonal nuts must be tightened with 195 Nm.
