Suspension Arm Systems Independant
Revision 1
79
7.9.3
Installing/Uninstalling the Cover Caps on the Extension Arm
Installing the cover caps
For reasons of simplification, the illustration shows the extension arm with spring arm
without cables. The detailed illustration shows the cover cap as sectional view.
•
Place the cover cap on the extension arm
end in a manner that the hold-down
device sits in the opening .
•
Slide the cover cap on the extension arm
with spring arm
up to the end stop so
that the latch snaps into the groove .
Ensure that the power supply unit and
the internal cables in the extension arm
with spring arm
are not damaged.
If the installation has been performed
correctly, the cover cap cannot be pulled
off the extension arm with spring arm
.
Make sure the cover cap is safely in place:
•
The cover cap must butt against the
contours of the extension arm with spring
arm
.
Fig. 7-37:
Installing the cover caps
