![KLS Martin IDP 101 S air plus Mounting Instructions Download Page 75](http://html.mh-extra.com/html/kls-martin/idp-101-s-air-plus/idp-101-s-air-plus_mounting-instructions_1978996075.webp)
Suspension Arm Systems Independant
Revision 1
75
7.9
Mounting the Canopy, Cover Caps and Claddings
7.9.1
Mounting the Single/Duo Canopy
Preparing to mount the canopy
For reasons of simplification, the illustration shows the interface plate without cables and
extension arm or spring arm.
•
Screw hexagonal nuts M10 on the
threaded bolts M10 x 360 mm .
•
Screw threaded bolts into the
interface plate
in a manner that the
canopy halves in the connection are aligned
with the intermediate ceiling/prefabricated
ceiling.
•
If there is an interface plate
on the raw
ceiling, shorten the threaded bolts
accordingly.
WARNING
Danger of injury due to the suspension arm
system falling!
Insufficiently tightened fastening elements can
cause the suspension arm system to fall:
•
Tighten 4 or 6 hexagonal nuts with a
torque of 46 Nm.
Fig. 7-33:
Preparing to mount the canopy
Make sure the threaded bolts are safely in place:
•
The threaded bolts must be installed at the same distance from the interface plate
.
•
The 4 or 6 hexagonal nuts must be tightened with 46 Nm.