Suspension Arm Systems Independant
Revision 1
65
7.6.7
Connecting the Cables on the Spring Arm, Single Arm, to the
M6 Service Head
•
Observe the safety notes, see section 7.6.1 “Safety Notes”, page 58.
Fig. 7-26:
Connecting the cables on the spring arm, single arm, to the M6 service head
The power cables, pneumatic pipes, earthing and control cables, as well as the gas hoses are
pre-installed in the M6 Service Head and must be routed through the pendant system.
Laying the power cable
•
Lay the power cable (laid in a spiral coiled tube if required) through the spring arm
above the swivel axis (swivel joint ) and lead it out of the mounting opening in the
bearing block of the spring arm.
•
Lay the power cable through the extension arm and towards the interface plate.
