manualshive.com logo in svg

Kirby Morgan M-48 SuperMask, User Manual

Share
Download
Kirby Morgan M-48 SuperMask User Manual Download Page 32

Donning

32

 

© MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001

Removing the Mask

The mask can be removed by pushing out-
ward on the SuperMask while at the same 
time gently pushing out on the two lower 
head harness adjustment buckles allowing 
the mask to slide forward.

Quick-Release Method 
of Mask Removal

Squeeze the latch tabs together on the quick-
release buckle to remove the mask from your 
head.

It is also possible to push outward on both the Temple and Jaw strap 
buckle in a controlled manner, then proceed to push the entire mask away 
from the face. 

Removing/Replacing Pod while Underwater

Users of the M-48 SuperMask

®

 should practice donning, doffing, pod 

removal, and replacement procedures on the surface, in the dry first. An 
excellent way to practice this is while sitting in front of a mirror. This will 
allow you to see exactly how things should align to obtain proper attach-
ment. As you progress with the technique, start attempting this with your 
eyes closed. Doing this for several minutes will train you as to the natural 
movements needed to attach the pod. It will become second nature with 
practice. 

Once the basic maneuvers have been practiced and the user is comfort-
able, for the initial use of the M-48 SuperMask

®

 it is recommended the 

user move into a calm, shallow, controlled body of water (5–10 feet, 1.5–3 
meters, in depth) to repeat the donning and doffing drills that were prac-
ticed in the dry.

Summary of Contents for M-48 SuperMask

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands