133
Command Reference
Reflection Measurement Option Subsystem
Reflection Measurement Option Subsystem
The Reflection Measurement Option Subsystem provides you
the SCPI command reference for the reflection measurement
function. Use the command
:INSTrument CAT
to access
this subsystem.
Option RM7 and TG7 are required to enable the reflection
measurement function.
Reflection Measurement Type
[:SENSe]:CAT REFLection|OPCLoss|DTF
[:SENSe]:CAT?
Toggles the reflection measurement mode between Reflection
Measurement, One Port Insertion LossMeasurement and
Distance to Fault Measurement.
Range:
REFLection, OPCLoss, DTF
Example:
:CAT OPCL
Key access:
Meas > Meas > Reflection Measurement / One Port Insertion Loss/
Distance To Fault
Reflection Measurement Calibration Type
[:SENSe]:CAT:CALibrate:TYPE FULL|SELected
[:SENSe]:CAT:CALibrate:TYPE?
This command toggles calibration type between full
frequency range calibration and selected frequency range
calibration.
Range:
FULL, SELected
Example:
:CAT:CALibrate:TYPE FULL
Key access:
Freq > Cal Type