6 Keysight E8357D/67D & E8663D PSG User’s Guide
Signal Generator Overview
Signal Generator Models and Features
— a source module interface that is compatible with Keysight 83550 Series
millimeter–wave source modules for frequency extension up to 110 GHz
and Oleson Microwave Labs (OML) AG–Series millimeter–wave modules for
frequency extensions up to 325 GHz
— automatic leveling control (ALC) on and off modes; power calibration in
ALC–off mode is available, even without power search
— CW output from 100 kHz to the highest operating frequency, depending on
the option
— external diode detector leveling
— frequency resolution to 0.001 Hz
— list and step sweep of frequency and amplitude, with multiple trigger
sources
— optimized signal to noise ratio
— 10 MHz reference oscillator with external output
— RS–232, GPIB, and 10Base–T LAN I/O interfaces
— user flatness correction
— pulse modulation
— internal pulse generator
— external modulation inputs
— selectable pulse modes: internal square, internal free–run, internal
triggered, internal doublet, internal gated, and external pulse;
internal triggered, internal doublet, and internal gated require an
external trigger source
— adjustable pulse rate
— adjustable pulse period
— adjustable pulse width (150 ns minimum)
— adjustable pulse delay
— selectable external pulse triggering: positive or negative
The E8663D PSG also offers the following optional features:
NOTE
To provide analog frequency sweeps and for optimum swept scalar
measurements with the 8757D scalar analyzer, the E8663D requires 007
(analog ramp sweep).
Option 007
—analog ramp sweep
Option 008
1
—8 GB removable compact flash drive
