Keysight E8663D, User Manual

Page: 114 / 358

100 Keysight E8357D/67D & E8663D PSG User’s Guide
Basic Digital Operation
Arbitrary (ARB) Waveform File Headers
Viewing Header Information for a Different Waveform File
While a waveform is playing in the dual ARB player, you can view the header
information of a different waveform file, but you can modify the header
information only for the waveform that is currently playing. When you select
another waveform file, the header editing softkeys are grayed–out (see Figure
3-6 ). This task guides you through the available viewing choices.
1. View the waveform file list: Press Mode > Dual ARB > ARB Setup > Header
Utilities > View Different Header .
As shown in Figure 3-7 , there is an alphabetical list of waveform files in the
table.
Figure 3-7 Waveform File List for Viewing a Different Header
2. View all waveform segments in non–volatile memory:
a. Press the Catalog Type softkey. As shown in Figure 3-7 , you have a
choice of three waveform file types that can be displayed in the
table accessed in step one.
NVWFM displays all waveform segments stored in
non–volatile memory
Seq displays all waveform sequence files
WFM1 displays all waveform segments stored in
volatile memory
b. Press the NVWFM softkey. The table displays the waveform files in
non–volatile memory.
3. View a waveform file’s header information: Highlight a file and press the
View Header softkey.
The header information for the selected waveform file appears in the PSG
display. If there is a waveform playing, its header information is replaced
by this information, but the waveform settings used by the signal
generator do not change. To return to the header information for the
Current waveform file type
Waveform File Types
Table