Keysight 41800A, Operation Note

Page: 13 / 61

Keysight 41800A Active Probe 13
Installation
Power Requirements
Power Requirements
Power for the 41800A is supplied by the Compatible Instruments listed in
Table 1-1 by connecting the 41800A's power plug to the probe power jack on
the instrument. If the instrument used with the 41800A does not have a probe
power supply, use a separate power supply which meets the requirements
listed in Figure 2-2 .
Figure 2-2 Probe Power Requirements
Mating Connectors
The output connector of the 41800A probe is a 50 Ω N-type male connector.
Trying to mate this 50 Ω N-type connector to a 75 Ω N-type connector will
result in damage to both connectors.
Keep the N-type output connector clean.
Environmental Requirements
The 41800A may be stored or shipped under the following environmental
conditions.
• Temperature: –40 °C to +70 °C
The unit must be protected from temperature extremes which can cause
condensation.