Keysight 34460A Operating And Service Manual Download

Page: 52 / 583

Key

Purpose

Reset the instrument for front panel use; equivalent to

SYST:PRESet

Take a single measurement.

Take one or more hands-free measurements.

Take a null measurement.

Configure the null function, smoothing filter (applies only to the 34465A and
34470A), scaling, statistics, and limits.

Configure the text and graphics that appear on the display and secondary meas-
urements.

Store and recall instrument states and preferences.

Configure I/O interfaces: LAN (optional on 34460A), USB, GPIB (optional).

Perform system administration tasks, including calibration.

Configure user preferences.

Perform file management activities, including the creation of "screen shot" files (dis-
play images).

Learn about the instrument, learn how to download or view documentation, view
the last error message, or clear error messages.

Perform autocalibration (34465A/70A only).

Select manual or auto ranging. Press

to manually uprange,

manually downrange.

Return to local control of the instrument (when in Remote mode), or indicate that
the next front panel key will be "shifted", for example

[Probe Hold]

instead of

[Single]

Keysight True

volt

Series Operating and Service Guide

Features and Functions

Summary of Contents for 34460A






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 34460A

Reviews:

Related manuals for 34460A

Brands by name

Popular brands

Keysight 34460A, Operating And Service Manual

Search results

Summary of Contents for 34460A

Reviews:

Related manuals for 34460A

Brands by name

Popular brands