Keysight 33210A, Service Manual

Page: 70 / 131

68
Chapter 4 Calibration Procedures
+10 dB Range Flatness Verification
4
5
Set the instrument to each output described in the table below and
measure the output amplitude with the power meter (the relative
measurement in dB).
6 Compare the measured output to the test limits shown in the table.
Keysight
33210A Measurement
Output Setup Function Amplitude Frequency Nominal Error
Q 50
Ω
Sine Wave +13.00 dBm 100.000 kHz 0 dB ± 0.1 dB
50
Ω
Sine Wave +13.00 dBm 200.000 kHz 0 dB ± 0.2 dB
50
Ω
Sine Wave +13.00 dBm 500.000 kHz 0 dB ± 0.2 dB
50
Ω
Sine Wave +13.00 dBm 2.000 MHz 0 dB ± 0.2 dB
50
Ω
Sine Wave +13.00 dBm 3.000 MHz 0 dB ± 0.2 dB
Q 50
Ω
Sine Wave +13.00 dBm 4.000 MHz 0 dB ± 0.2 dB
50
Ω
Sine Wave +13.00 dBm 5.000 MHz 0 dB ± 0.2 dB
50
Ω
Sine Wave +13.00 dBm 8.000 MHz 0 dB ± 0.3 dB
Q 50
Ω
Sine Wave +13.00 dBm 10.000 MHz 0 dB ± 0.3 dB