U3022AH10
Controlling the System with N5242A/B
Figure
37
Command Console for 'B' Model Analyzers
SCPI Command Processor Console
Write Commands Once the Command Processor Console is open, commands can
remotely control the external Test Set I/O connector by sending the following:
address: an integer number
data:
an integer number
Address and data are separated by a comma. Commands should be separated by a new line, or
carriage return.
For example:
CONT:EXT:TEST:DATA <address>,<data>
CONT:EXT:TEST:DATA 0,0
Example: CONT:EXT:TEST:DATA 0,0
Refer to
“Address and Data Values” on page
Figure
38
SCPI Command Processor
46
U3022AH10 User's and Service Guide
