Keysight Technologies U3022AH10, User'S And Service Manual

Page: 24 / 92

U3022AH10 System Configurations
6. Secure the network analyzer’s lower locking feet to the Test Set upper locking feet,
using the spring–loaded screws on the locking feet, as shown in Figure 1 1 . If the network
analyzer's lower locking feet are not aligned with the screw holes in the Test Set's upper
locking feet, loosen the screws securing the feet to the instrument slightly to align.
Figure 1 1 Locking Feet Screws (STD shown)
There are two Lock-Feet kits available. Refer to “Contacting Keysigh t”
on page 90 for ordering information.
•
PNA − 5023-0132 (Kit includes locking feet and screws)
•
Test Set (STD) − N5242-20138 and N5242-20139 are the rear lock f ee t
•
Test Set (Opt 129) - N5242-20206 and N5242-20207 are the rear lock
feet (provided)
•
Screw − 0515-2317
24 U3022AH10 User's and Service Guide