Keysight Technologies U3022AH10, User'S And Service Manual

Page: 34 / 92

U3022AH10 Controlling the System with N5242A /B
The following menu will allow the physical Ports 1 through 12 to be identified as any port for
your convenience. For example, Port 5 can be named Port 2.
The
External Test Set Control - U3022AH10 also allows control of the DUT control lines,
refer to “DUT Control Lines” on page 54 . To change the state from LOW to HIGH, select the
graphical user interface (GUI for the specific C ontrol Line 1 through 8 ) and then press OK.
Each line can be controlled separately, as shown in Figure 23 .
Figure 23 External Test Set U3022AH10 (Port 1 - 8)
Select the Port Control down arrow for Ports 9 through 12.
Figure 24 External Test Set U3022AH10 (Port 9 - 12)
Control Lines
34 U3022AH10 User's and Service Guide