U3022AH10
Description
Description
The Keysight U3022AH10 is a 10-Port Multiport Test Set Extension designed to be configured
for high power measurements in either a 12 or 14 port network analyzer measurement system.
The Keysight U3022AH10 has the following key features:
•
Capable of handling
one
watt of
RF
power
"High Power Measurements" on page
•
10 Test Ports (3.5 mm male connectors)
•
Low loss mechanical RF switching
•
Frequency range of operation (10 MHz to 26.5 GHz)
•
A Keysight PNA-X with Option 551 is required with a rear panel Test Set I/0 interface for
operational control. An external personal computer is not required.
The Keysight PNA-X Network Analyzers will be referred to throughout this
document as the Analyzer. The U3022AH10 will be referred to as the Test Set.
Measurement Application Notes
Low Loss DUT Measurements
Low loss trace ripple is a product of switch repeatability and calibration technique. Low insertion
loss measurements exhibiting a 0.1 dB uncertainty ripple residing on the measurement response
is not uncommon.
Switch Configuration Command Speed
When writing address and data values to the test set directly, include a 15ms wait before
issuing another address and data set. The delay of 15ms is required for the test set internal
switches to settle. Failure to add the delay could cause the test set internal switches to stick or
cause intermittent failures.
Verifying the Shipment
Inspect the shipping container. If the container or packing material is damaged, it should be kept
until the contents of the shipment have been checked mechanically and electrically. If there is
physical damage refer to
. Keep the damaged shipping
materials (if any) for inspection by the carrier and an Keysight representative.
10
U3022AH10 User's and Service Guide
