U3022AH10
Controlling the System with N5242A/B
SCPI Control Mode
The Command Processor feature allows you to send remote commands and data to the
analyzer’s rear-panel GPIB connector and Test Set I/O connector. More information regarding
the Command Processor can be found in the Help menu.
Overv
iew of the SCPI
Control
The Command Processor allows you to send address and data to control an external test set
without creating a remote program. The user is required to manually input address and data
using the Command Processor Console in the Help menu.
•
Command Processor settings can not be saved or recalled.
•
Address and data can be
written
from the Command Processor.
How to Access the Command Processor
1. To access the Command Processor select
Utility > System > Configure > SICL/GPIB/SCPI
-
OR-
(System Setup > Remote Interface > SCPI Monitor Input > Show SCPI Parser Console)
,
and check SCPI Command Processor Console box.
Figure 3
6
Command Console for 'A' Model Analyzers
U3022AH10 User's and Service Guide
45
