U3022AH10
Front and Rear Panel Features
Test Ports
–
3.5 mm Bulkhead (male)
•
Port
3
–
12
Test Port LEDs
•
An illuminated LED indicates an active port and if it is in Source or Receiver mode.
•
If all of the Source (amber) or Receiver LEDs (green) are illuminated, all of the ports are
terminated.
•
If all of the odd numbered ports are Off, Port 1 of the PNA-X is active.
•
If all of the even numbered ports are Off, Port 2 of the PNA-X is active.
Active LED
•
When the Test Set power switch is On and is connected and addressed by a PNA-X, the LED
is On (illuminated).
•
The LED is Off (not illuminated) when the Test Set power switch is in Standby, or not
addressed by a PNA-X.
Standby Switch
Note that this switch is Standby only, not a line switch. To disconnect the mains from the
instrument, remove the power cord.
18
U3022AH10 User's and Service Guide
