Keysight Technologies N4373D, User Manual

Page: 37 / 176

Getting Started
Keysight
N4373D Lightwave Component Analyzer, User’s Guide 35
Angled contact connectors have up to 30dB higher return loss
than straight connectors, and we recommend them for best
performance results. With angled fiber endfaces, reflected light
tends to reflect into the cladding, reducing the amount of light
that reflects back to the source.
Enabling and disabling the laser output
You can switch the
l
aser on and off by pressing the button
beside the Optical Output.
After the LCA application running on the network analyzer has
initialized it, the green LED beside the laser output indicates
whether the laser is emitting radiation. If the Laser output is on,
the green LED on the front panel of the module is lit. If the
Laser output is off, the green LED on the front panel of the
module is unlit.
Starting the LCA
1 If it is not already running, start the LCA server by pressing
, or by clicking the LCA server icon on the desktop.
If the LCA server is running, but the function keys are not
displayed, press the [Macro/Local] Utility key until they appear.
2 Press .
You can now proceed with setting up measurement. For further
information on measurements see the “User Interface
Reference” on page 67 and “Making Measurements” on page 83.
Accessing the User’s Guide
1 If it is not already started, start the LCA as described
above.
2
Press in the LCA user interface to get to the electronic
Version of the users guide.
N O T E
This button overrides the internal laser ON/OFF settings.

Pressing this button during a measurement will cause errors in the results.