Keysight Technologies M8131A User Manual Download

Page: 154 / 158

154

Keysight M8131A 16/32 GSa/s Digitizer User’s Guide

Characteristics

General

WARNING

The instrument is not designed for outdoor use. Do not expose the

instrument to rain or other excessive moisture. Protect the instrument

from humidity and temperature changes, which could cause

condensation within the instrument.
Do not operate the instrument in the presence of flammable gases,

fumes or powders. Operation of any electrical instrument in such an

environment constitutes a definite safety hazard.

Power consumption

350 W (nom)

Safety designed to

IEC61010-1, UL61010, CSA22.2 61010.1 tested

EMC tested to

IEC61326-1

Warm-up time

15 min

Calibration interval

2 years recommended

Cooling
Requirements

When operating the M8131A choose a location that provides at least 80 mm of clearance at rear, and at
least 30 mm of clearance at each side for the AXIe chassis.

Summary of Contents for M8131A































































































































































Search results

Summary of Contents for M8131A

Reviews:

Related manuals for M8131A

Brands by name

Popular brands

Keysight Technologies M8131A, User Manual

Search results

Summary of Contents for M8131A

Reviews:

Related manuals for M8131A

Brands by name

Popular brands