Keysight M8131A 16/32 GSa/s Digitizer User’s Guide
75
M8131A User Interface
3
The calibration dialog is used to calibrate M8131A module. You can also
save and load the calibration for future use.
Figure 22
Calibration dialog
Starting Calibration Process
To start the calibration:
1 Go to
Utilities > Calibration
.
The
Calibration Manager
dialog box appears.
2 Click on the
Start Calibration
button. The
Process Result
will display
the message “Calibration has been started”. At any point of time, you
can quit the calibration process by clicking on the
Abort
button.
