Keysight Technologies M8131A User Manual Download

Page: 103 / 158

Keysight M8131A 16/32 GSa/s Digitizer User’s Guide

103

Remote Programming

:CALibrate:ADC:SAVE

Command

:CALibrate:ADC:SAVE <file_name>

Description

The command saves the calibration data of the ADC module to a file.

<file_name>

A quoted ASCII string with a maximum of 254 characters

including the entire path name, if used. The filename assumes the present

working directory, if a path does not precede the file name.

:CALibrate:ADC:LOAD

Command

:CALibrate:ADC:LOAD <file_name>

Description

The command loads the calibration data of the ADC module from a file.

<file_name>

A quoted ASCII string with a maximum of 254 characters

including the entire path name, if used. The filename assumes the present

working directory, if a path does not precede the file name.

Summary of Contents for M8131A































































































































































Search results

Summary of Contents for M8131A

Reviews:

Related manuals for M8131A

Brands by name

Popular brands

Keysight Technologies M8131A, User Manual

Search results

Summary of Contents for M8131A

Reviews:

Related manuals for M8131A

Brands by name

Popular brands