Keylogbook
– Getting Started Guide
12/09/2013
33
Export - Import
All the above details can quickly be transferred from one device to another by utilising the export import option on
the company details screen shown below
Rates
If you wish to track the cost of projects and want Keylogbook to produce invoices, the drilling rates will need to be
entered. The invoice is saved at the end of the project in a PDF format and can be attached to the final exploratory
hole log (please note you cannot edit the invoice template in version one).
Back up
Here you set the default settings for backing up the Keylogbook data. Keylogbook will not recognise that you wish
to use this option unless you have a USB stick inserted or a SD card is inserted in the tablet, you must give the file
a “Path” i.e. the project name. Name the file and select the appropriate drive normally the D drive and tap
SAVE
Delete project
This option should be used with extreme caution
it will completely remove project details for the programme
and is not reversible. There is ample space on the hard drive for thousands of projects so there is never really a
need to remove them. The option is there to remove any projects that have been entered in error.
Hole Continuation
This toggles the default setting as to whether each hole you start is a new hole or a continuation of another hole,
i.e. a Rotary follow on of a Cable Percussion hole.
Clients Details
Most of the client details can be imported from the drilling instructions sheet but not the clients address therefore
for the invoice to print correctly the clients address must be complete select
client details
from the thumbpad and
complete the details. You may also edit the
client’s details from here.