Keynetix Keylogbook, User Manual, Page: 19 / 45

Keylogbook
– Getting Started Guide
12/09/2013 19
Entering Project details
To set up a new project you must complete the following questions. Items marked with a * cannot be blank. Enter
the details as listed below and press Next after each item has been entered. It is vital that when prompted for the
type of drilling that you select the appropriate drilling that you want to record all this data is only entered once to
save time during the job so please ensure it correctness
Question Data
* What is the Project Title? The full Project
Title remember
you
will only
enter this once
so the full title
* What is the Project Number? The full Project
Number again
only
entered
once
* What date did the project start Today's date will
be selected by
default. Tap on
the date required
* Categorisation of site in accordance with
BDA guidelines
Yellow
* Who is the client for the project? A consultant Ltd
What is the client's engineer's name for this
project?
Bill Mallard
What is the client's Email address where
data will be sent? BM@gmail.com
* Who is the project engineer? David Parks
*
Enter the engineer’s email address where
data will be sent
DP@gmail.com
* What type of exploratory hole are you
carrying out?
CP
Once you have entered the above data tap the
Finish button. Your project has now been created and added to
the list of available projects on the unit. By default the new project is immediately opened and the exploratory hole
list screen is displayed as shown below so that you are ready to enter your first exploratory hole.
Project details can be edited from the project list screen. This can be
accessed by tapping the
Project button on the screen below
Adding a Exploratory hole
To add a exploratory hole to a project, tap the Create button on the exploratory hole list page.