Kessel 010-694, Instructions For Installation, Operation And Maintenance

Page: 72 / 264

72 / 264
Operating menu settings
03/2015
2 Maintenance
2.1 Manual mode 2.1.1 Pump I
2.1.2 Potential-free contacts
2.1.3 External signal generator
2.1.4
Communication
2.1.5
Pump II
2.1.6
Flap
2.1.7 AC output
2.1.8 DC output
2.2 Automatic operation 2.2 Automatic operation On OFF
2.3 SDS Self diagnosis system 2.3.1 “Test pump I
Test battery
Test pump II
Test flap”
OK Fault
2.4 Maintenance date 2.4.1 Next maintenance mm:hh - dd.mm.yy
2.4.2
Last maintenance
mm:hh - dd.mm.yy
2.5
Maintenance done
2.6
Maintenance interval
2.6.1
Commercial 3 months
2.6.2 Commercial 6 months
2.6.3 Private 12 months
2.6.4 Manual maintenance
2.6.5 No maintenance interval
2.7 Clearance remote control 2.7.1 Clearance duration
2.7.2 Deactivate
3 Settings
3.1
Parameters
3.1.1
On delay
s 0 - 99
3.1.2
Run-on time
s 0 - 99
3.1.3 Max. current A 3.5 - 9.5
3.1.4 Min. current A 0.5 - 2.5
3.1.5 Max. run occur #/10min 1 - 99
3.1.6 Max. run time min 0 - 999
3.1.7 Air bubble compressor offset mm 0 - 99
3.1.8
Sensor height
mm 0 - 999
3.1.9
SDS Self diagnosis system
d 1 - 180
3.1.10
Sensing zone level probe
mm 0 - 9999
3.1.11 ON1 level mm 0 - 5000
3.1.12 OFF1 level mm 0 - 5000
3.1.13 Alarm level mm 0 - 5000
3.1.14 ON2 level mm 0 - 5000
3.1.15 OFF2 level mm 0 - 5000
3.1.16
On delay flap
s 0 - 99
3.1.17
Post run time flap
s 0 - 99
3.1.18
Max. current flap
mA 150 - 200
3.1.19 S1/S3 Pump operation S1 operation/S3
operation
3.2 Profile memory 3.2.1 Save parameters