Kerotest Manufacturing
–
SHANNON & PAF III OPERATORS MANUAL - REV 3
Page 4 of 60
WARRANTY AND LIMITATION OF LIABILITY
1.
EF TECHNOLOGIES, INC. warrants Kerotest Electrofusion Processors against defects resulting from
faulty workmanship or materials for a period of one year from the date of the new unit calibration. Any
Processor repaired or replaced pursuant to this warranty within the original warranty period will be
warranted for the remainder of the original warranty period. EF TECHNOLOGIES, INC. also warrants the
calibration and repair services it provides on the Processor against defects resulting from faulty
workmanship for a period of 60 days upon which the calibration or repair services are complete.
2.
If EF TECHNOLOGIES, INC. receives notice of such defects during the warranty period, EF
TECHNOLOGIES, INC. will repair or replace, free of charge, including ground shipping charges, any
Processors or Services which are found to be defective in workmanship or material, provided that the
following conditions are met:
a)
EF TECHNOLOGIES, INC. is notified in writing of such defect immediately upon discovery of same
and the defective Processor is promptly returned to EF TECHNOLOGIES, INC. (at the location
designated by EF TECHNOLOGIES, INC. for those purposes), freight prepaid. Claimant must
provide documentary evidence of failure, as well as the components that are alleged to have
failed and agree to inspection by EF TECHNOLOGIES, INC. of the circumstances in which the
alleged defective Processor(s) was/were used.
b)
The Processor has been maintained, calibrated, serviced and used in full compliance with this
Manual and other technical information or literature provided by EF TECHNOLOGIES, INC. from
time to time.
c)
the Processor has not been altered or modified after leaving EF TECHNOLOGIES, INC.
’
S premises,
shows no evidence of disassembly or tampering, is not and has not been subjected to abnormal
operating conditions, accident, abuse, misuse, unauthorized alteration or repair and the defect is
not due, without limitation, to faulty installation, maintenance, calibration or use, improper site
preparation or maintenance, ordinary wear and tear, corrosion, acts of nature such as
earthquakes, fire, flood or lightning or any other event of force majeure.
d)
EF TECHNOLOGIES, INC. does not warrant that the operation of Kerotest Electrofusion Processors
will be uninterrupted or error free.
e)
Replacement Processor may be either new or like-new.
3.
EF TECHNOLOGIES, INC. disclaims any liability or responsibility:
a)
for labor, materials and/or other expenses required to replace the defective Processor or Service
or to repair any damage resulting from the use thereof.
b)
for loss or damage resulting from
failure to abide by manufacturer’s warnings, safety instructions
or other precautionary guidelines.
4.
ANY CLAIM OF LIABILITY ASSERTED AGAINST EF TECHNOLOGIES, INC WHETHER IN CONTRACT OR IN
TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, WITH RESPECT TO OR ARISING OUT OF THE SALE,
DELIVERY, INSTALLATION, REPAIR OR USE OF ANY PROCESSORS OR SERVICES SOLD BY EF
TECHNOLOGIES, INC. SHALL NOT EXCEED THE PURCHASE PRICE OF THE PROCESSORS OR SERVICES
FOUND TO BE DEFECTIVE. It is the responsibility of the owner to obtain and pay for emergency repairs.
