Kerotest Manufacturing
–
SHANNON & PAF III OPERATORS MANUAL - REV 3
Page 38 of 60
When the device is first started, it may take up to 2 minutes to acquire 5 satellites. During the
acquisition process the display will look something like this:
CONNECT FITTING 3
GPS Searching . . .
If after a few minutes, t
he SMART Scanner™ still has not acquired 5 satellites, you may t
ry to follow some
of the suggestions in the GPS section on page 47, or you can bypass the GPS data by simply connecting
t
he fitting. The SMART Scanner™ will
show you a message similar to the following:
WAIT FOR GPS SIGNAL
PRESS TO IGNORE
IF YOU CHOOSE TO PRESS THE BUTTON, YOU WILL BE ABLE TO SCAN THE BARCODE AND COMPLETE THE
FUSION NORMALLY; HOWEVER, GPS DATA WILL NOT BE STORED WITH THE FUSION.
