Kenton PRO-2000, Operating Manual

Page: 16 / 21

15
specified memory location and also to the edit buffer (current setup)
the data will be immediately utilised and the display will be updated.
You may change the block number of a memory dump without causing any
problem. For example, data that came from memory 6 could be returned to
the current setup by merely changing the 06 in byte [ 7 ] to a 00.
Parameter data are stored in the following addresses.
Address Function Range Notes (
see end
)
00h
A Receive chan 0 - 15 { 1 }
01h A note priority 0 - 2
02h A trig / retrig 0 - 1
03h A transpose 232 > 0 > 24 { 2 }
04h A pitchbend range 0 - 24
05h A portamento speed 0 - 255
06h A portamento cont # 252 - 0 - 119 { 3 }
07h A lfo depth controller # 252 - 0 - 119 { 4 }
08h A lfo max val 0 - 127
09h A lfo assign 0 - 1
0Ah A gate select 0 - 7 5 modes used
0Bh A fine tune val 129 > 0 > 127 129>0 = -ve
0Ch A scale val 129 > 0 > 127 129>0 = -ve
0Dh A v/o – hzv – 1.2v select 0 - 2
0Eh
B Receive chan 0 - 15 { 1 }
0Fh B note priority 0 - 2
10h B trig / retrig 0 - 1
11h B transpose 232 > 0 > 24 { 2 }
12h B pitchbend range 0 - 24
13h B portamento speed 0 - 255
14h B portamento cont # 252 - 0 - 119 { 3 }
15h B lfo depth controller # 252 - 0 - 119 { 4 }
16h B lfo max val 0 - 127
17h B lfo assign 0 - 1
18h B gate select 0 - 7 5 modes used
19h B fine tune val 129 > 0 > 127 129>0 = -ve
1Ah B scale val 129 > 0 > 127 129>0 = -ve
1Bh B v/o – hzv – 1.2v select 0 - 2
1Ch
C Receive chan 0 - 15 { 1 }
1Dh C Transmit chan 0 - 15 { 1 }
1Eh D Receive chan 0 - 15 { 1 }
1Fh D kadi / wasp select 0 - 1
20h
Ax1 Receive chan 0 - 15 { 1 }
21h Ax1 Cont # 239 > 0 > 119 { 6 }
22h Ax1 min val / fine tune 0 > 64 > 127 { 5 }
23h Ax1 max val / scale 0 > 64 > 127 { 5 }
24h Ax1 reset val 0 > 64 > 127 { 5 }
25h Ax1 lfo cont # 252 - 0 - 119 { 4 }
26h Ax1 lfo max val 0 - 127
27h Ax1 lfo assign 0 - 1
28h
Ax2 Receive chan 0 - 15 { 1 }
29h Ax2 Cont # 239 > 0 > 119 { 6 }
2Ah Ax2 min val / fine tune 0 > 64 > 127 { 5 }