Keithley DMM7510, Calibration Manual, Page: 114 / 142

In this section:
TSP commands ........................................................................ 4-1
TSP commands
Introduction
This section contains detailed information on the Model DMM7510 remote calibration commands.
acal.count
This attribute returns the number of times automatic calibration has been run.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R) Yes Not applicable Not applicable Not applicable
Usage
value = acal.count
value
The number of times auto calibration has been run
Details
The number of times that auto calibration has been run since the last factory calibration. The count
restarts at 1 after a factory calibration.
Example
print(acal.count) Returns the number of times auto calibration has been
run.
Example output:
15
Also see
Auto calibration (on page 2-4)
acal.run() (on page 4-6)
Section 4
TSP command reference