![background image](http://html1.mh-extra.com/html/keithley/2010/2010_quick-reference-manual_3980445045.webp)
39
Command
Description
Default
param.
SCPI
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
:STATe <b>
:STATe?
:DETector
:BANDwidth <NRf>
:BANDwidth?
:VOLTage:[DC]
:NPLCycles <n>
:NPLCycles?
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
Specify reference (-757.5 to
757.5).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolu-
tion (4 to 7).
Query resolution.
Path to configure and control
the filter.
Select filter type: (MOVing or
REPeat).
Query filter type.
Specify filter count (1 to 100).
Query filter count.
Enable or disable filter.
Query state of digital filter.
Path to configure bandwidth:
Specify bandwidth (3 to
300e3).
Query bandwidth.
Path to configure DC voltage:
Set integration rate (line
cycles; 0.01 to 10).
Query line cycle integration
rate.
Path to configure measure-
ment range:
Select range (0 to 1010).
Query range.
Enable or disable auto range.
Query auto range.
Specify reference (-1010 to
+1010).
Enable or disable reference.
Query state of reference
(0 or 1).
Use input signal as reference.
Query reference value.
Specify measurement resolu-
tion (4 to 8).
Query resolution.
Path to configure and control
the filter.
Select filter type: (MOVing or
REPeat).
Query filter type.
Specify filter count (1 to 100).
0
OFF
6
(Note)
10
OFF
30
1
1000
ON
0
OFF
8
(Note)
10
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Table 10. SENSe command summary (cont.)