background image

 

PN 4343876 

June 2013 

© 2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. 

All product names are trademarks of their respective companies. 

106 & 107 

Digital Multimeters 

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY 

This Fluke product will be free from defects in material and workmanship for one 

year from the date of purchase. This warranty does not cover fuses, disposable 

batteries, or damage from accident, neglect, misuse, alteration, contamination, or 

abnormal conditions of operation or handling. Resellers are not authorized to 
extend any other warranty on Fluke’s behalf. To obtain service during the warranty 

period, contact your nearest Fluke authorized service center to obtain return 

authorization information, then send the product to that Service Center with a 
description of the problem. 
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH 

AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. 

FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR 

THEORY. Since some states or countries do not allow the exclusion or limitation of 
an implied warranty or of incidental or consequential damages, this limitation of 
liability may not apply to you. 

 

Fluke Corporation 
P.O. Box 9090 

Everett, WA  98206-9090 

U.S.A. 

Fluke Europe B.V. 
P.O. Box 1186 

5602 BD Eindhoven 

The Netherlands 

11/99

Summary of Contents for 106

















Reviews: