Keithley 2010, Quick Reference Manual

Page: 44 / 60

38
Command Description
Default
param.
SCPI
:COUNt?
:STATe <b>
:STATe?
:DETector
:BANDwidth <NRf>
:BANDwidth?
:CURRent:[DC]
:NPLCycles <n>
:NPLCycles?
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
:STATe <b>
:STATe?
:VOLTage:AC
:NPLCycles <n>
:NPLCycles?
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO?
Query filter count.
Enable or disable filter.
Query state of digital filter.
Path to configure bandwidth:
Specify bandwidth (3 to
300e3).
Query bandwidth.
Path to configure DC current.
Set integration rate (line
cycles; 0.01 to 10).
Query line cycle integration
rate.
Path to configure measure-
ment range:
Select range (0 to 3.1).
Query range.
Enable or disable auto range.
Query auto range.
Specify reference (-3.1 to 3.1).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolu-
tion (4 to 8).
Query resolution.
Path to configure and control
the filter.
Select filter type: (MOVing or
REPeat).
Query filter type.
Specify filter count (1 to 100).
Query filter count.
Enable or disable filter.
Query state of digital filter.
Path to configure AC voltage.
Set integration rate (line
cycles; 0.01 to 10).
Query line cycle integration
rate.
Path to configure measure-
ment range:
Select range (0 to 757.5).
Query range.
Enable or disable auto range.
Query auto range.
OFF
30
1
3
ON
0
OFF
8
(Note)
10
OFF
1
775
ON
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Table 10. SENSe command summary (cont.)