42
Command
Description
Default
param.
SCPI
:OCOMpensated <b>
:OCOMpensated?
:DCIRcuit <b>
:DCIRcuit?
Enable or disable offset com-
pensation.
Query offset compensation.
Enable or disable dry circuit
ohms.
Query dry circuit ohms.
OFF
OFF
√
√
:TEMPerature
:NPLCycles <n>
:NPLCycles?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
:STATe <b>
:STATe?
:TRANsducer <name>
:TRANsducer
:TCouple
:TYPE <name>
:TYPE?
:RJUNction[1]
:RSELect <name>
:RSELect?
:SIMulated <n>
:SIMulated?
:REAL
Path to configure temperature:
Set integration rate (line
cycles; 0.01 to 10).
Query line cycle integration
rate.
Specify reference (-200 to
1372).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolu-
tion (4 to 7).
Query resolution.
Path to configure and control
the filter.
Select filter type: (MOVing or
REPeat).
Query filter type.
Specify filter count (1 to 100).
Query filter count.
Enable or disable filter.
Query state of digital filter.
Select transducer type (FRTD
or TCouple).
Query transducer type.
Path to configure thermocou-
ple:
Select thermocouple type
(J, K, T, or N).
Query thermocouple type.
Path to configure reference
junction:
Select reference type (SIM-
ulated or REAL).
Query reference type.
Specify simulated tempera-
ture in °C (0 to 50).
Query simulated tempera-
ture.
Path to configure real refer-
ence junction:
1
0
OFF
6
(Note)
10
OFF
TCouple
J
SIMulated
23°C
Table 10. SENSe command summary (cont.)
