37
Table 10. SENSe command summary
Command
Description
Default
param.
SCPI
[:SENSe[1]]
:FUNCtion <name>
:FUNCtion?
:DATA?
:DATA
:FRESh?
:HOLD
:WINDow <NRf>
:WINDow?
:COUNt <NRf>
:COUNt?
:STATe <b>
:STATe?
:CURRent:AC
:NPLCycles <n>
:NPLCycles?
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
Select measurement function:
‘VOLTage:AC’, ‘VOLTage :DC’,
RESistance’, ‘FRESistance’,
‘CURRent:AC’, ‘CURRent: DC’
,‘FREQuency’, ‘TEMPerature’,
‘PERiod’, ‘DIODe’, “CONTi-
nuity’.
Query function.
Return the last instrument
reading.
Returns a new (fresh) reading.
Path to control Hold feature:
Set Hold window (%); 0.01 to
20.
Query Hold window.
Set Hold count; 2 to 100.
Query Hold count.
Enable or disable Hold.
Query state of Hold.
Path to configure AC current.
Set integration rate (line
cycles; 0.01 to 10).
Query line cycle integration
rate.
Path to configure measure-
ment range:
Select range (0 to 3.1).
Query range.
Enable or disable auto range.
Query auto range.
Specify reference (-3.1 to 3.1).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolu-
tion (4 to 7).
Query resolution.
Path to configure and control
the filter.
Select filter type: (MOVing or
REPeat).
Query filter type.
Specify filter count
(1 to 100).
‘VOLT
[:DC]’
1
5
OFF
1
3
ON
0
OFF
6
(Note)
10
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
