![background image](http://html1.mh-extra.com/html/keithley/2010/2010_quick-reference-manual_3980445053.webp)
47
Table 14. Trigger command summary
Command
Description
Default
param.
SCPI
:INITiate
[:IMMediate]
:CONTinuous <b>
:CONTinuous?
:ABORt
:TRIGger
[:SEQuence[1]]
:COUNt <n>
:COUNt?
:DELay <n>
:AUTO <b>
:AUTO?
:DELay?
:SOURce <name>
:SOURce?
:TIMer <n>
:TIMer?
:SIGNal
:SAMPle
:COUNt <NRf>
:COUNt?
Subsystem command path:
Initiate one trigger cycle.
Enable or disable continuous
initiation.
Query continuous initiation.
Reset trigger system.
Subsystem command path:
Path to program Trigger Layer:
Set measure count (1 to 9999,
or INF).
Query measure count.
Set delay (0 to 999999.999
sec).
Enable or disable auto delay.
Query state of delay.
Query delay.
Select control source
(IMMediate, TIMer, MANual,
BUS, or EXTernal).
Query control source.
Set timer interval (0 to
999999.999 sec).
Request the programmed timer
interval.
Loop around control source.
Specify sample count (1 to
1024).
Query sample count.
(Note 1)
(Note 2)
0
ON
IMMediate
0.1
1
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Notes:
1. Defaults for continuous initiation:
:SYSTem:PRESet enables continuous initiation.
*RST disables continuous initiation.
2. Defaults for count:
:SYSTem:PRESet sets the count to INF (infinite).
*RST sets the count to 1.