Keithley 2010, Quick Reference Manual

Page: 46 / 60

40
Command Description
Default
param.
SCPI
COUNt?
:STATe <b>
:STATe?
:TERMinal <name>
:TERMinal?
:RATio <b>
:RATio?
:STERminals
:RANGe
[:UPPer] <NRf>
[:UPPer]?
:AUTO <b>
:AUTO?
:REFerence <NRf>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
Query filter count.
Enable or disable filter.
Query state of digital filter.
Select terminal type: (NORMal
or SENSe).
Query terminal type.
Takes ratio of input/sense ter-
minal.
Query ratio state.
Path to sense terminal com-
mands.
Path to configure measure-
ment range:
Specify STERminal range
(0 to 10.1).
Query range.
Enable or disable sense
terminal autorange.
Query sense terminal
autorange.
Specify reference (REL) value
for sense terminals
(-10.1 to 10.1).
Enable or disable sense
terminal reference (REL).
Query sense terminal ref-
erence (REL) state.
Use and save sense termi-
nal input as new reference.
Query sense terminal refer-
ence (REL) value.
OFF
NORMal
1.000000
ON
0
OFF
:RESistance
:NPLCycles <n>
:NPLCycles?
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
Path to configure resistance:
Set integration rate (line
cycles; 0.01 to 10).
Query line cycle integration
rate.
Path to configure measure-
ment range:
Select range (0 to 120e6).
Query range.
Enable or disable auto range.
Query auto range.
Specify reference (0 to 120e6).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolu-
tion (4 to 8).
1
100e6
ON
0
OFF
8
√
√
√
√
√
√
√
√
√
√
√
√
Table 10. SENSe command summary (cont.)