P30
Diagnostic options
FAQ V1.01
33
© KEBA
Note for devices with firmware version prior to 3.06: Communication with the
safety logic of the charging station may abort at irregular intervals. The error
can be remedied in such cases by restarting the charging station. Since the
error can occur repeatedly with old firmware versions, a software update is
required.
ERROR_CONFIG
Error group:
0x[xxx]8
The internal system configuration is faulty.
Measures
Replace the charging station.
ERROR_PERSIST
Error group:
0x[xxx]c
A previously occurring error persists despite running through the automatic
error reaction. The error is displayed on the LED bar alternately with the trig-
gering error if the original error can no longer be reset.
Measures
Contact the KEBA support.
ERROR_CON
Error group:
0x[xxx]d
Internal error
Measures
Contact the KEBA support.
ERROR_STATE
Error group:
0x[xxx]e
The internal charge controller has requested an illegal status change.
Measures
Cancel charging and switch off charging station for a short time (30 seconds)
via the line circuit breaker. Then restart the charging process.
If the error persists: The charging station is defective and must be sent in for
repair.
