P30
Frequently asked questions (FAQ)
FAQ V1.01
16
© KEBA
Example:
KC-
[***]
- ES2400
[*]
2-000-xx
Example
Description
Options
[***]
Product type
●
P20
●
P30
[*]
Equipment series
●
0
... e-series
●
1
... b-series
●
2
,
3
,
A
...c-series
●
B
,
C
,
D
...x-series
How are software updates performed?
P20 and P30 e-, b-, c-series without network connection
: A description of
how to perform the firmware update is included with the update file.
P20 and P30c-series with network connection (slave charging station)
:
The software update is carried out at the master charging station. The mas-
ter charging station passes on the update to the connected slave charging
stations.
P30
x-series
: To bring the software of the charging station up to date, a soft-
ware update in the form of a *.keb file is required. The software update can
be done with a USB stick, via LAN or via the web interface. With a software
update, both the software and the firmware of the charging station are up-
dated.
Caution
The power supply may not be interrupted during the software update!
This can lead to the destruction of the software on the charging station and
thus make further operation impossible.
Information
The software update can take up to an hour. The update process is indi-
cated by a slow orange flashing of the LED bar.
After the software update, the charging station restarts automatically. The
LED bar will flash blue or green, depending on the authorization setting.
Software update via USB stick (P30 x-series)
To perform a software update via a USB stick, the following steps are neces-
sary:
1) Download the current software for the charging station (* .keb file).
2) Plug the USB stick into a PC.
3) Format the USB stick with FAT32.
