P30
Frequently asked questions (FAQ)
FAQ V1.01
22
© KEBA
How do I tell when a slave is connected to the master?
●
In the web interface
●
On the LED bar
●
Without OCPP connection: On the slave charging station, the left 3 segments of the
LED bar will blink green or blink blue if authorization is required.
●
With OCPP connection: On the slave charging station, all 4 segments of the LED
bar flash green or blink blue if authorization is required.
How many slave charging stations can I connect to a master charging station?
Up to 15 slave charging stations in a local charging network can be con-
nected to a master charging station.
2.9.6
Router/Switch
Which router/switches can be used?
All.
How should be the router/switches be configured?
Information about this can be found in the configuration manual of the router/
switch.
What must be observed when using a router?
Port forwarding must be activated.
Am I permitted to attach two master charging stations with activated internal DHCP
server to the same switch?
No. The use of two master charging stations in the same network is only per-
mitted if an external DHCP server is used (DHCP function of both master de-
activated).
2.9.7
Configuration
Which USB sticks can I use for the configuration?
All USB sticks that are formatted with FAT32 can be used.
Information
For further information, please refer to the "P30 x-series Configuration Man-
ual".
