KAYO MOTOR TD125, Service Manual

Page: 48 / 93

2.Clean up the dust attached to the air filter sponge and soak the surface with the air filter oil. If the dust on the
sponge is really difficult to deal with, you can also replace a new air filter sponge.
3.Use gasoline to clean the fire net and allow it to air dry naturally.
4.Flush air filter housing with water and allow to air dry
Disassembly and assembly of exhaust pipe
Steps of disassembly and assembly of exhaust pipe are as
follows:
1.Remove the muffler.
2.Remove the bolts fixing on the exhaust pipe.
3.Remove the spring.
4.Remove the fixing nut at the connection of engine and
exhaust pipe.
5.Remove the exhaust pipe
6.Assembly shall be carried out in the reverse order of
disassembly.
Disassembly and assembly of muffler
The exhaust pipe and muffler can guide gas emission and
reduce noise.If the exhaust pipe is broken or damaged due to
rust or impact, please replace the new one immediately. If the
noise is too high or the engine performance degrades, replace
the muffler. For the cleaning of the exhaust system, please
consult with KAYO dealer.
If you need to replace the muffler, please follow the following
steps:
1.Unscrew the fixing nut of muffler.
2.Unscrew the fixing bolt of muffler.
3.Loosen the connection buckle between the muffler and the
exhaust pipe;
4.Pull backward the muffler.
5.Replace the muffler and install the fastener;
6.Assembly shall be carried out in the reverse order of
disassembly.
Disassembly and assembly of fuel tank
Disassembly and assembly of fuel tank
1.Remove the seat.
2.Unscrew the bolt at the back of fuel tank.
3.Unscrew the bolt in the front of fuel tank.
4.Remove the fuel tank form the frame.
5.Assembly shall be carried out in the reverse order of disassembly.
Check the chain and clean it