KAYO MOTOR TD125, Service Manual

Page: 92 / 93

The motorcycle tilted to one
side
Chassis bending Contact KAYO Service Center
Improper steering adjustment Check and readjust
Bending of steering shaft Contact KAYO Service Center
There is a problem with the front fork Contact KAYO Service Center
Vehicle misalignment
Re-adjust the tension of spokes, and
contact KAYO service center if
necessary
Brake failure
Disc brake worn Replace the disk brake
Insufficient brake fluid Refill brake fluid
Brake fluid deterioration Replace brake oil
Damage of the piston Contact KAYO Service Center
Brake pad worn
Check brake discs and replace brake
discs if their thickness is less than the
minimum friction thickness
Vehicle tightening torque meter
Note: Before installing the thread, apply anti-rust grease on the thread and bonding surface.
No. Item Fastener specification Qty Torque
（
N
•
m
）
1 Front brake caliper bolts M8×40 full thread 2 20
～
32
2 Directional column cover silver chrome finish 1 /
3 Upper pressure block screw M8×25 4 20
～
32
4 Front disc brake disc bolts M8×16 4 25
～
35
5 Front axle nut M14×1.5 1 124
～
165
6 Shift rod bolts M6×20 1 7
～
11
7 Engine bolts M8×110 2 20
～
32
8 Engine nuts M8 2 20
～
32
9 Exhaust pipe nuts M8 2 20
～
32
10 Guide chain screw M6×12 3 7
～
11
11 Swing arm nuts M10×1.25 1 40
～
70
12 Chain adjuster bolts M8×40 S10 2 20
～
25
13 Chain adjuster nuts M8 2 20
～
25
14 Rear shock bolts M10×45×1.25 2 40
～
70
15 Rear shock nuts M10×1.25 2 40
～
70
16 Rear brake disc bolts M8×16 4 25
～
35