Kathrein CAP 650 GPS, Operating Manual

Page: 43 / 48

43 of 48
12.5 LED Status Display on the CAP Converter
V2 - external Pushbutton
Function LED Colour Signal Description
Error Red
LED flashes 1x for 0.5 sec, then pauses for 2 sec No connection to CAP/HDS
LED flashes 2x for 0.5 sec, then pauses for 2 sec Satellite not found
LED flashes 3x for 0.5 sec, then pauses for 2 sec Ignition is active
LED flashes 4x for 0.5 sec, then pauses for 2 sec Turntable is blocked
LED flashes 5x for 0.5 sec, then pauses for 2 sec Operating voltage too low
LED flashes 6x for 0.5 sec, then pauses for 2 sec Temperature warning
LED flashes 7x for 0.5 sec, then pauses for 2 sec Channel list incorrect
LED flashes 8x for 0.5 sec, then pauses for 2 sec CAP software not up to date
LED flashes 9x for 0.5 sec, then pauses for 2 sec CAP requires calibration
To return the CAP converter to normal operation:
1. Check the cause of error.
2. Press the pushbutton once to acknowledge the error so that the CAP converter can return to normal
operation.
Normal
operation
Green
LED flashes slowly CAP is in the park position
LED flashes 3x, followed by a short pause
CAP is moving to the park posi-
tion.
LED flashes quickly
CAP is searching for a satellite
signal
LED is permanently on Satellite found
Red LED is permanently on Standby
Green-red LED flashes quickly 3x green and 1x red
CAP is reset and moves to the
park position
USB
update
Yellow
1)
LED is permanently on Downloading data from USB
Red-green-
yellow
LED flashes quickly Update successful
Red
LED flashes 1x for 0.5 sec, then pauses for 1.5 sec Data carrier not found
LED flashes 2x for 0.5 sec, then pauses for 1.5 sec
Folder structure/update file not
found
LED flashes 3x for 0.5 sec, then pauses for 1.5 sec Invalid update file
LED flashes 4x for 0.5 sec, then pauses for 1.5 sec Saving update file failed
1) On the external push-button, the red and the green LEDs are on at the same time