35 of 48
9.2 Manually Lowering the Turntable
1. Using a narrow flat-bladed screwdriver, lever the plastic cap in the
centre of the axis (see the arrow).
➯
You can see an M8 hexagon head screw (WAF 13 mm).
2. Remove the M8 hexagon head screw using a socket wrench
(WAF 13 mm).
➯
You can see another thread.
3. Screw an M12 x 40 screw (minimum length: 40 mm) into this thread.
➯
The rocker is pushed off the taper seating on the tapered shaft and
the engagement is released.
Risk of material damage!
►
Screw in the M12 screw only as far as to free the
rocker from the engagement on the tapered shaft.
4. Tilt the antenna to the park position.
5. Remove the M12 screw.
➯
You can put the rocker back on the tapered shaft.
6. Screw in the M8 screw and tighten it.
7. Replace the plastic cap.
Rocker displacement!
Loosening the rocker from the tapered shaft causes the
rocker zero point position to be lost.
►
The rocker must be recalibrated by an authorised
specialist dealer.
8. Consult an authorised dealer.
Summary of Contents for CAP 650 GPS
Page 37: ...37 of 48 10 2 Dimensions in mm 144 5 65 5 ...
Page 47: ...47 of 48 ...
