5 of 48
2
Scope of Delivery
①
Turntable with integral controls
②
Flat antenna
③
CAP converter V2
The CAP 650 GPS/HDP 650 GPS consists of:
●
Turntable
①
complete with control electronics, pre-assembled flat antenna
②
and twin LNB
●
Mounting plate
●
Complete cabling set:
1 x master coaxial cable
1)
, 3 m, marked in red, for the master connection to the CAP converter V2
2)
1 x slave coaxial cable
1)
, 3 m, for connection to a second receiver or TV with an integrated receiver
1 x power supply cable
1)
, 3 m
1 x coaxial extension cable, 5 m, F-type female connector to F-type male connector
1 x power supply extension cable, 7 m for connection to the on-board power supply
1 x blade-type fuse and fuse holder
●
Roof duct with sealing gasket
●
CAP converter V2
③
with a 12 V connection cable and LED/pushbutton cable
3)
●
4 x wood screw, 4.5 mm x 30 mm
●
CAP 650 GPS/HDP 650 GPS operating manual
1)
Fixed connection to the turntable
2)
A coaxial cable
F-socket/F-socket
is required to connect the TV set to the CAP converter (cable length depends on the distance
between the two devices). This cable is
not
included. For this, see
12.1 Installing the CAP Converter, p.41
.
3)
only with CAP 650 GPS
①
②
③
Summary of Contents for CAP 650 GPS
Page 37: ...37 of 48 10 2 Dimensions in mm 144 5 65 5 ...
Page 47: ...47 of 48 ...
